Latte
Latte is steamed milk. This feature is perfect for hot chocolate drinks. To
make a latte:
1. Open the milk container compartment.
2. Adjust the milk tube pinch screw. Tightening the screw (clockwise)
makes the milk warmer, opening it makes it cooler.
3. Put the milk tube into the container of milk.
4. Put a cup or mug under the coffee and milk dispenser.
5. Push the latte button. Foamed milk will dispense from the
coffee and milk dispenser. You may push the latte button
again to make the coffee system stop before the normal
amount is dispensed.
6. If you want to dispense more latte, wait until the display
reads "Machine Ready", then push the latte button again.
You can also program the coffee system to dispense a
larger latte each time the button is pushed. See page 26.
7. When the display reads "Machine Ready", carefully
remove the cup from the brewing compartment.
Latte Button
Milk Tube and Pinch Screw
WARNING
To avoid sickness, perform a milk cleaning according to the
Cleaning and Maintenance section within two hours of the
last milk drink being dispensed. "Please Milk Clean" will
appear on the display. See page 35.
I M PO RTANT
Using non-dairy creamers or half-and-half may cause poor
quality foam.
The fat content in milk varies according to region and milk
brand. For best results you may need to experiment with
different milk fat contents (whole, 2%, 1%), brand names,
milk pinch screw settings and the milk foam level.
Use and Care Manual
To Next Page
Loading...
Need help?
General
