[Turning on headlight]
Put main switch key in “ON” position and
turn on headlight switch.
<Lighting>
To light headlight, turn the rightside light-
switch-button to the side of “” mark.
<Extinguishing>
To extinguish headlight, turn the right-
side light-switch-button to the side of
“○” mark.
[Headlight high/low beam switch]
High beam or low beam can be operated
by the use of high/low beam switch.
High Beam
...... used when needing extra
light.
Low Beam
...... used when other vehicles are
present, in the city, etc.
If this switch is turned on when the main
switch is in an ON position, the winker will
operate.
(R)....used when making a right turn.
(L)....used when making a left turn.
12
Headlight Winker Switch
Caution
●The winker switch does not auto-
matically turn back to its original
position after completing the turn.
Please set the switch back to its
center position after turning.
HEADLIGHT HIGH/LOW
BEAM SWITCH
WINKER SWITCH
(HI)
D
(LO)
D
HEADLIGHT SWITCH
To Next Page
Loading...
Need help?
General
