D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
43
Printed in Jan. 2001 PS-MMA0415-E1A
(2) Heat the piston with a electric heater,
then take out the piston pin from the
piston as tapping it with a round
wooden bar.
(3) Remove the piston ring with a plier.
(4) Clean the piston thoroughly.
3.1.32. Cylinder liner
z Disassemble the cylinder liner with a
special tool or hand but be careful not to
generate any damage at cylinder block.
3.1.33. Cam shaft gear and idle gear
z Unscrew the camshaft gear fixing bolts
and remove the camshaft gear.
To Next Page
Loading...
