D1146/D1146TI/DE08TIS
MAINTENANCE MANUAL
85
Printed in Jan. 2001 PS-MMA0415-E1A
3.3.22. Oil pan
z Remove the gaskets thoroughly that
project at the timing gear case, case
cover of cylinder block, and the
contacting part of flywheel housing by
means of a scraper.
CAUTION :
Be careful for the gasket pieces not fall
into the engine during the work.
z Coat the silicone at the gasket part that
was removed (Contacting part), and
attach the new oil pan gasket.
z Assemble the oil pan by
tightening the oil
pan assembling bolts, and when
tightening bolts, primarily tighten the
bolts (4ea) at the both ends, and then
tighten the rest bolts to specified torque.
Torque
2.2 kg.m
CAUTION :
Align the bolt holes with gasket holes
to prevent damage to the gasket and
tighten.
3.3.23. Oil filter
z Install the oil filter onto the cylinder block,
and tighten the fixing bolts.
To Next Page
Loading...
