Daewoo DTD-7500 - Answering a Call; Speakerphone; Making a Call; Handset Mute

Handset Basic Funcons
9. ANSWERING A CALL
1. Press key when phone rings.
2. (Press again to engage
speakerphone if need).
3. Press key to end the call.
10. SPEAKERPHONE
1. Press key twice to turn on the
speaker.
2. Press key again to toggle back
to handset receiver.
11. MAKING A CALL
1. Enter phone number and conrm
on display.
2. Press key to go on-line and
dial.
3. (Press again to engage
speakerphone if need).
4. Press key to end the call.
12. HANDSET MUTE
1. While on a call, press to mute
the handset for privacy.
2. Press again to un-mute.
13. VOLUME CONTROL (RECEIVER
AND SPEAKERPHONE)
While on a call, press key on
the handset (side) to change volume
seng. Volume seng is indicated
as VL1 to VL5 on screen.
14. AMPLIFY FUNCTION
1. While on a call, press key to
add an extra level of amplicaon
(35 dB) to the receiver volume.
This is indicated by an illuminated
key.
2. Press key again to disable the
extra lever of amplicaon
(35 dB).
15. AUTOMATIC & TALKING
FUNCTION SWITCHES
The funcon can be set to ON
automacally each me the phone
is being used. This automac seng
can be selected via a slide switch
and is recommended for a single
user household.
Warning: If there are both normal
and hard-of-hearing users, please do
not use the automac ON seng.
This protects normal hearing users
from sudden acousc shock due to
loud volume seng.
Talking CID and Talking Keypad
feature can also be set to ON /
OFF via a second slide switch.
1. Open baery compartment
cover to expose two small slide
switches as shown.
2. Slide Switch 1 to ON if you want
to get the Automac AMP.
3. Slide Switch 2 to ON for talking
CID and talking keypad.
(Note: Both switch funcons can
be altered by changes made in
“HS SETTINGS” sub-menu and
vice-versa).
16. HANDSET TONE CONTROL
1. While on a call and is acve
(illuminated), digital tone control
becomes acve.
35