Daewoo DTD-7500 - Restore Factory Default Settings for Base; Call Log Review; Call Back to an Incoming Call; Save an Incoming Call to the Phone-Book

2. Press or to scroll to “HS
SETTINGS”.
3. Press key to conrm.
4. Press or key to scroll to
“HS DEFAULT”.
5. Press key for conrmaon
and it displays “PIN ?”.
6. Input PIN number xxxx (factory
default PIN = “0000”).
7. Press key for conrmaon. A
sound of “di du” indicates success.
However, a sound of “di”, indicates
the wrong PIN inpung. Re-enter
the PIN again.
8. Press key to quit and return
to standby mode. Please allow 10
seconds for the handset to re-
establish handshaking with base.
45. RESTORE FACTORY DEFAULT
SETTINGS FOR BASE
Note: This seng restores base
factory default sengs. All custom
sengs will be lost. All messages and
me will be aected.
1. While o-line, press key and
screen displays “CALL LOG”.
2. Press or to scroll to “BS
SETTINGS”.
3. Press key to conrm.
4. Press or key to scroll to
“BS DEFAULT”.
5. Press key for conrmaon
and it displays “PIN ?”. Input PIN
number xxxx (factory default PIN =
“0000”).
6. Press key for conrmaon; a
sound o f “di du” indicates success.
However, a sound of “di” indicates
the wrong PIN input. Re-enter again.
7. Press key to quit and return
to standby mode. Please allow 10
seconds for the handset to re-
establish handshaking with the
base.
46. CALL LOG REVIEW (RECEIVED
CALLS)
1. Press key while o-line and it
displays “CALL LOG”.
2. Press key and it displays
“RECEIVED”.
3. Press key and it displays the
latest group of incoming calls.
4. Press or key to scroll to
the number for call back or to save.
Note: Press the key while in
o-line mode is a short-cut to the
incoming call List.)
47. CALL BACK TO AN INCOMING
CALL
1. Aer reviewing the incoming
call and while that number is sll
showing on LCD screen.
2. Press the key to dial it out.
48. SAVE AN INCOMING CALL TO
THE PHONE-BOOK
1. Aer reviewing the incoming
call and while that number is sll
showing on LCD screen.
2. Press key for conrmaon,
then the screen displays “COPY TO
PB ?”
3. Press key once and screen
displays “ADD TO PB ?”
4. Press key and it displays the
name?
5. Enter the name using the keypad.
6. When nish, press key and
it displays phone number again for
eding.
7. Press , or key to revise
phone number.
8. Press key to save and back to
incoming call review mode.
9. Press key to exit to o-line
mode.
42