Daewoo DTD-7500 - Intercom between Handsets

54. INTERCOM BETWEEN
HANDSETS
1. This funcon is available when two
or more handsets are registered to
the same base.
2. Base must be powered up in order
for the intercom funcon to work.
Intercom from Handset 1 to Handset
2.
3. While in the standby mode, press
PAGE key on handset 1, the LCD will
display “HS ?”.
4. Input “2” and the display shows
“CALLING HS 2”.
Handset 2 will ring.
5. The user on Handset 2 acvates key
of Handset 2 to enter talking mode.
6. Press key of any of the two
handsets to end the intercom mode
and returns to the standby mode.
55. HANDSET RING TONE &
VOLUME SETTING
11. While o-line, press key and
it displays “CALL LOG”.
2. Press or key to scroll to
“HS SETTINGS”.
3. Press key and it displays
“AUDIO SETTING”.
4. Press or key and to scroll
to ”RING SETUP”.
5. Press key and the screen
displays “INT RING”.
6. Press or to display either
“INT RING” or “EXT RING”.
(INT RING means seng the internal
intercom ringer.)
(EXT RING means seng the
external incoming call ringer.)
External incoming call ringer
7. While “EXT RING” is shown, press
to select.
8. Press key and the screen
displays “MELODY”.
9. Press key and the screen
displays the current ringer and
sound the current ringer, such
as “MELODY 1”.
10. Press or key to scroll
to dierent ringer melody (ten
dierent ringer sounds are
available)
11. Aer selecng the ringer sound,
press key to conrm and the
screen displays “MELODY” again.
12. Press or to display
“VOLUME”.
13. Press key and the screen
displays current volume of ring
tone, such as “VOLUME 3”
14. Press or to scroll to
dierent ring volume (5 levels)
15. Press key to conrm the new
selecon on display. A sound of “di
du” indicates a successful selecon.
16. Press key to exit to standby
mode
INTERNAL INTERCOM RINGER
1. While o-line, press key and it
displays “CALL LOG”.
2. Press or key to scroll to
“HS SETTINGS.
3. Press key to conrm and it
displays “AUDIO SETTING”
4. Press or key to scroll to
”RING SETUP”.
5. Press key and the screen
displays “INT RING”.
6. Press key to conrm and the
screen displays “MELODY”.
7. Press key and the screen
displays the current ringer and
sound the current ringer, such
as “MELODY 1”
8. Press or key to select
dierent ringer (ve dierent
internal ringer sounds)
9. Aer selecng the ringer sound,
press key to conrm and the
44