page.
3. Over the intercom, tell Handset 2
that an outside call is waing.
4. Press key on Handset 1 to
transfer the call and then press
key on Handset 1 to exit.
(Note: If within 30 seconds there is
no answer, the call will ring handset
1.)
59. CONFERENCE CALL
This allows two handsets
conferencing with the incoming
caller.
1. On Handset 1, press key to
answer the incoming call.
2. On Handset 1, press PAGE key
and then press “2” on the keypad to
page Handset 2.
(This also places the caller on
HOLD.)
3. On Handset 2, press key to
answer the page.
4. On Handset 1, press key to
iniate conferencing. Both Handset
1 and Handset 2 are now connected
to the outside caller.
5. On either handset, press key to
end the call and return to o-line.
60. NON-DISTURB FUNCTION
(DONOT-DISTURB)
This funcon turns o the handset
ringer and allows the user to ignore
all incoming calls (except intercom
calls).
1. Press and hold key for ve
seconds to enter non-disturb
funcon and the screen displays
“NON-DISTURB”.
2. To turn-o “NON-DISTURB”,
press and hold key again for ve
seconds.
61. PAUSE FUNCTION
During pre-dialing or one-touch
memory programming, press the
key, it will insert a 2-second pause
into the dialing sequence.
62. BARRING (TOLL RESTRICTION)
This funcon allows the user to
prevent certain phone number
prex from dialing out. For example:
1 900 xxx xxxx numbers can be
restricted.
1. While o-line, press key and
screen displays “CALL LOG”.
2.Press key to scroll to “HS
SETTING”. Press to select.
3. Press key to scroll to
“BARRING”. Press to select.
4. Handset screen displays “PIN?”.
5. Enter PIN on keypad and then
press to conrm (default PIN is
“0000”).
6. Handset screen displays “SELECT
NUM”. Press to conrm.
7. Handset screen displays
“NUMBER 1”. Press to conrm.
8. Handset screen displays
“NUMBER ?”.
9. Enter the prex for toll restricng
(up to 4-digits is allowed).
10.Press to conrm.
11.Press or key to enter
another prex (4 prexes are
allowed).
Note: On Step 6, you may also
select “OFF” or “EXTERNAL” opons.
“OFF” means no barring or blocking.
“EXTERNAL” means block all
outgoing calls.
46