Daewoo DTD-7500 - Time Format Setting (12; 24 Hr); Date & Time Setting; Restore Factory Default Settings for Handset

“MODIFY PIN” funcon
5. Press key to conrm and the
screen displays “PIN ?”
6. Input the old or default PIN
number “xxxx” and it display NEW
PIN? (Note: factory default PIN =
“0000”)
7. Input your favorite new PIN
number with 4 digits. In case of a
wrong input, press key to delete
and then re-enter.
8. Press key for conrmaon, the
screen displays “REPEAT”,
9. Input new PIN again. (Record your
new PIN for future use, as it cannot
be recovered)
10. Press key to conrm. A
sound of “di du” indicates success.
11.Press key to exit to o-line
mode.
42. TIME FORMAT SETTING (12/24 H)
1. While o-line, press key and it
displays “CALL LOG”.
2. Press or key to scroll to
“HS SETTINGS”
3. Press key to conrm.
4. Press or key to scroll to
“DATE & TIME” and press to
conrm.
5. Press key and then the screen
displays “TIME FORM”
6. Press key and the screen
displays “12H”
7. Press or key to select
either “12H” or “24H” format.
8. Press key to conrm. A sound
of “di du” indicates success. Screen
displays “TIME FORM” again.
9. Press key to exit to o-line
mode.
43. DATE & TIME SETTING
If you subscribe to Caller ID (CID)
service from your local phone
company, the date and me
informaon within the CID data will
update this automacally.
Otherwise, user must set me in
“24” hour format mode and then
change to the 12 hour format later
for the proper display of AM or PM.
(Note: “AM / PM” indicaon can not
be set in the 12 hour mode.)
1. While o-line, press key and it
displays “CALL LOG”.
2. Press or key to scroll to
“HS SETTINGS”
3. Press key for conrmaon
4. Press or key to scroll
to “SET TIME” and press for
conrmaon.
5. Use the number keys to input
new me in (HH / MM) format,
6. Press key for conrmaon.
A sound of “di du” indicang
successfully seng. The screen
displays “SET TIME” again.
7. Press or key to scroll
to “SET DATE” and press for
conrmaon.
8. Use the number keys to English
input new date in (MM / DD )
format.
9. Press key for conrmaon.
A sound of “di du” indicang
successfully seng. The screen
displays “SET DATE” again.
10.Press key to quit and go back
to standby mode
44. RESTORE FACTORY DEFAULT
SETTINGS FOR HANDSET
Note: This seng restores handset
factory default sengs. All custom
sengs will be lost. All phone book
entries are not aected.
1. While o-line, press key and
screen displays “CALL LOG”.
41