2. Press or key to select
one of four tone sengs for best
voice clarity. Digital tone seng is
indicated on screen as T1 to T4.
3. If necessary, re-adjust receiver
volume in order to further
enhance voice clarity.
17. Programming One-Touch
MEMORIES
While o-line, enter phone
number and conrm on screen.
2. Press and hold (or M1, M2)
for 5 seconds to save. You will hear
a beep sound that conrms that it
has been done successful.
18. DIALING FROM A ONE-TOUCH
MEMORY
1. While o-line, press to conrm
number.
2. Press to go on-line and dial.
19. OUTGOING CALL LIST (CALL
BACK / COPY / DELETE )
1. While o-line, press rst to
see the last call made.
2. Press or to review the last
10 calls made.
3. To redial the number on display,
just press .
4.(To delete or add to Phone-
Book, press and then scroll
to appropriate submenu opon.
Press to conrm).
20. Incoming Call List (Call Back/
Copy / Delete )
(Must subscribe to phone
company CID service in order to
see caller informaon)
1. While o-line, press key rst
to view the latest incoming caller
info.
2. Press to scroll the incoming
call list.
3. To dial the number on display,
just press .
4. (To delete or copy to Phone-
Book, press and then
scroll to appropriate submenu
opon. Press to conrm).
21. CREATE PHONE-BOOK ENTRIES
While o-line, press and then
to scroll to “PHONE -BOOK”.
2. Press to conrm.
3. Press to scroll to “NEW
ENTRY”.
4. Press to conrm. Screen
displays “NAME ?”.
5. Type in name and then press
to save.
6. Screen displays “NUMBER ?”.
7. Type in phone number and
press to save.
8. Screen displays “MELODY 1”
and auto-plays the melody.
9. Press to save. Screen
displays “NEW ENTRY”.
10. Press to end, or go to Step
4 to create another entry.
22. LIST AND SEARCH A PHONE-
BOOK ENTRY
1. While o-line, press and
then to scroll to “PHONE -BOOK”.
2. Press to conrm. Screen
displays “LIST”.
3. Press to conrm and screen
displays the rst phone-book
entry.
4. Press or to search phone-
book.
5. To call the number shown on
the screen at any me, just press
key .
36