Daewoo DTD-7500 - Auto-Answer When Lifting Handset; Handset Name Setting; Language Selection; Modify PIN (Changing the Password)

7. Press key to conrm. A sound
of “Du” indicang successful seng.
8. Press key to quit seng and to
exit to o-line mode,
38. AUTO-ANSWER WHEN LIFTING
HANDSET
(If this funcon is ON, liing the
handset from the base
automacally answers the incoming
call. There is no need to press the
key. Factory default is “OFF”.)
1. While o-line, press key and it
displays “CALL LOG”.
2. Press or key to scroll to
English
3. Press key and it displays
“AUDIO SETUP”.
4. Press or key to scroll to
“AUTO ANSWER”.
5. Press key to conrm, and it
displays “ON” or “OFF”..
6. Press or key to select OFF
or ON.
7. Press key to conrm. A sound
of “di du” indicates success.
8. Press to exit to o-line mode.
39. HANDSET NAME SETTING
This funcon allows you to display
a favorite NAME on the handset
screen. A name like “Study”, “Kevin”
or “Living Rm” suggests where it
belongs.
1. While o-line, press key and it
displays “CALL LOG”.
2. Press or key to scroll to “HS
SETTINGS” funcon
3. Press key and it displays
“AUDIO SETTING”.
4. Press or to scroll to “HS
NAME”.
5. Press key to select and a
cursor is ashing.
6. Use keypad to input name.
7. Press key to conrm. A sound
of “di du” indicates success.
8. Press key to exit to o-line
mode “HS SETTINGS” funcon.
40. LANGUAGE SELECTION
Sexteen languages are supported on
the LCD display.
The DTD-7500 only support Spanish
on the Talking CID & Talking Keypad.
1. While o-line, press key and it
displays “CALL LOG”.
2. Press or key to scroll to
“HS SETTING” funcon
3. Press key to conrm and it
displays “AUDIO SETUP”.
4. Press or key to scroll to
“LANGUAGE” funcon
5. Press and it displays
“ENGLISH”.
6. Press or to select
“FRENCH” or “SPANISH”.
7. Press key to conrm. A sound
of “di du” indicates success.
8. Press key to exit to o-line
mode
41. MODIFY PIN (CHANGING THE
PASSWORD)
Certain important funcon changes
require the user to enter a PIN
number so that accidental change
can not happen. Factory default PIN
is “0000”.
1. While o-line, press key and it
displays “CALL LOG”.
2. Press or key to scroll to “BS
SETTING” funcon
3. Press to conrm.
4. Press or key to scroll to
40