K1000896E Operation and Maintenance Manual Inspection, Maintenance and Adjustment 4-21
50 HOUR / WEEKLY SERVICE
PERFORM ALL DAILY SERVICE CHECKS
GREASE FRONT ATTACHMENT PINS
1. Following fittings are greased daily, or every 10 hours, for first 100 hours of operation to comply with
new machine break-in requirements. After that, greasing should be done every 50 hours. If bucket is
being used in water, grease fittings immediately after machine is removed from water.
D
C
B
A
E
F
AOO0050L
Figure 27
To Next Page
Loading...
