Daewoo Mega 250-V - Inspection, Maintenance and Adjustment; Preventive Maintenance

K1000896E Operation and Maintenance Manual Inspection, Maintenance and Adjustment 4-1
4INSPECTION, MAINTENANCE AND
ADJUSTMENT
PREVENTIVE MAINTENANCE
Periodic checks and replacement of oil, grease,
filters, etc. must be made at specific intervals, to
keep machine in good working condition. The
following pages describe items to be checked,
lubricants to be used, and time interval between
each check.
NOTE: Time interval between each
service check may need to be
shortened if machine is
operating in severe
atmospheric conditions.
Machines working in extremely
hot or dusty conditions will
require more frequent service
checks. Total hours of machine
operation are determined by
hour meter that is on the front
instrument panel.
SERIAL NUMBERS
There are two serial number plates attached to
the body of wheel loader.
Please make note of these numbers and their
locations. These will be required whenever
warranty service work is requested.
Machine Serial Number
The machine serial number plate is on left side
of front frame above wheel cover (Figure 1).
Figure 47
10
1
HA0O2012
Figure 1