K1000896E Operation and Maintenance Manual Operating Controls 2-15
TRANSMISSION DISPLAY
A transmission display is to the left of the
steering wheel on the dash. The LCD indicates,
gears, direction of travel, error codes, and
activated kick-down.
Figure 22, shows the transmission display in
detail.
A. Indicates travel direction and gear
selection. See Figure 23 for more detailed
information.
B. Indicates normal operation and error
codes. For a list of error codes. See
“Transmission Error Codes” on page 6-10.
NOTE: Most codes are only two digits.
C. Indicates that error codes have occurred
and are stored.
D. Indicates that operation must be stopped
immediately to prevent damage to
transmission and hazardous operating
condition.
The gear range indicator bars will indicate which
gear is selected by displaying the corresponding
number of bars. The forward and reverse
indicator bars will be "OFF" when the
transmission is in "MANUAL MODE."
When transmission is in "AUTOMATIC MODE,"
all the gear range indicator bars and both travel
direction indicators will be "ON."
Figure 21
(D) (A)
(B)
(C)
HAAA3770
Figure 22
HAAA3774
FORWARD
INDICATOR
GEAR RANGE
INDICATOR BARS
REVERSE
INDICATOR
Figure 23
To Next Page
Loading...
