K1000896E Operation and Maintenance Manual Operating Controls 2-49
SEAT ADJUSTMENT
1. ADJUSTING SEAT FORWARD/
BACKWARD LEVER
Holding lever (3, Figure 98), raise it up,
while pushing or pulling seat to desired
position. Release lever once desired
position is reached. Adjustment range is
160 mm (6.3 in).
2 & 3. ADJUSTING SEAT'S ANGLE AND
HEIGHT LEVER
Pulling left lever (3, Figure 98) up allows
rear part of seat to be moved up or down.
Pulling lever (2) up allows front part of seat
to be moved up or down. Adjust seat
according to operator's size and work
conditions. Adjustment range is 60 mm
(2.36 in) for both front and rear.
4. WEIGHT ADJUSTMENT KNOB
Turning knob (4, Figure 98) to right makes suspension harder. Turning knob to left makes
suspension softer. Adjust according to operator's weight by checking weight indicator dial.
Adjustment range is from 50 - 120 kg (110 - 265 lb).
5. BACKREST ADJUSTMENT LEVER
Pulling up right lever (5, Figure 98) allows seat backrest to be moved forward or backward.
WARNING!
Whenever operator or operating condition
has changed, check to see that seating
position is suitable for the condition at
hand. Always fasten your seat belt while
operating vehicle. Adjust backrest so that
the operator can fully reach and operate
pedals.
HAOB110L
Figure 97
1
4
5
3
2
HBOI350L
Figure 98
To Next Page
Loading...
