2-50 Operating Controls K1000896E Operation and Maintenance Manual
6. ANGLE ADJUSTMENT OF ARMREST
Adjustment angle of left and right armrest
(6, Figure 99) is done by turning a dial in
bottom of armrest. When you adjust angle,
manually raise armrest before turning dial.
7. HEADREST
Headrest (7, Figure 99) can be adjusted
forward/backward and up/down. Move it
by holding both sides.
RECOMMENDATIONS FOR LIMITING VIBRATIONS
1. Select the right machine, equipment and attachments for a particular application.
2. Replace any damaged seat by a Daewoo genuine part. Keep the seat maintained and adjusted.
• Adjust the seat and suspension for the weight and size of the operator.
• Inspect and maintain the suspension and adjustment mechanisms of the seat regularly.
3. Check that the machine is properly maintained.
• Tire pressure, brakes, steering, linkages, etc.
4. Steer, brake, accelerate, shift gears, move the attachments and load the attachments smoothly.
5. Adjust the machine speed and travel path to minimize the vibration level.
• Slow down if it is necessary when passing rough terrain.
• Drive around obstacles and excessive rough terrain conditions.
6. Keep the terrain on work sites where the machine is working and travelling in good condition.
• Remove any large rocks or obstacles.
• Fill any ditches and holes.
• Provide machines for and schedule time to maintain the terrain conditions.
7. Travel over longer distance (e.g. on public roads) at adjusted (medium) speed.
• Always adjust the speed for preventing bouncing.
HAOB130L
Figure 99
To Next Page
Loading...
