K1000896E Operation and Maintenance Manual Operating Controls 2-13
9. TRANSMISSION LEVER
F Forward - When the lever is pushed
forward, transmission is in
"FORWARD." 1st, 2nd, 3rd and 4th
are available.
N Neutral - When the lever is returned
to the center position, between
forward and reverse, the
transmission is in "NEUTRAL."
R Reverse - When the lever is pulled
back, transmission is in "REVERSE"
1st, 2nd and 3rd are available.
Rotating the switch shifts transmission
between 1st, 2nd, 3rd, or 4th gear.
NOTE: There is a transmission display,
on the dash, that indicates,
gears, direction of travel, error
codes and kick-down activation.
(See page 2-15)
A transmission neutral lever lock is in base
of transmission lever. This neutral lever
lock prevents the transmission lever from
being moved out of "NEUTRAL."
N "NEUTRAL LOCK" position.
Prevents lever from being moved out
of "NEUTRAL."
D "DRIVE" position. Allows lever to be
moved from "NEUTRAL" to
"FORWARD and REVERSE."
CAUTION!
"LOCK" transmission lever. When
ever machine is parked, "LOCK"
transmission lever in "NEUTRAL" to
prevent accidental machine
movement.
R
N
F
2
3
1
HAAA3680
Figure 17
Figure 18
To Next Page
Loading...
