K1000896E Operation and Maintenance Manual Operating Controls 2-35
1. Neutral Switch
When this switch is pressed, 2nd gear function will be operated, and then 2nd gear indicator
light turns "ON."
When 2nd gear function is operated, this switch is pressed, and then machine is neutral.
2. Forward Switch
When this switch is pressed at forward traveling while "KD" (5, Figure 68) switch is pressed,
machine can travel forward. When machine is travelled, it can convert forward and reverse
travel without pressing "KD" (5, Figure 68) switch.
3. Reverse Switch
When this switch is pressed at reverse traveling while "KD" (5, Figure 68) switch is pressed,
machine can travel reverse. When machine is travelled, it can convert forward and reverse
travel without pressing "KD" (5, Figure 68) switch.
4. Horn Switch
(See page 2-27)
5. Kick-down Switch
(See page 2-26)
NOTE: Operating condition of 2nd gear function.
• Start a engine.
• Transmission lever is neutral.
• Parking brake switch is off (release).
NOTE: Release condition of 2nd gear function.
• When the transmission lever will be push forward or pull reverse.
• When the parking brake switch turns "ON."
• When the starter switch turns "OFF."
To Next Page
Loading...
