K1000896E Operation and Maintenance Manual Operation 3-5
COLD WEATHER ENGINE START
1. Set parking brake switch to the "I"
(APPLIED) position. This will ensure that
the parking brake is "APPLIED."
2. Move all control levers to "NEUTRAL"
position.
3. Make sure transmission neutral lock is in
the "N" (NEUTRAL LOCK) position.
4. Set pilot cutoff switch to "O" (LOCKED)
position. This will "LOCK" pilot control
valve lever (joystick).
IMPORTANT
If transmission lever is not in
"NEUTRAL" position, engine will not
start.
HA0O2019
P
O
I
Figure 8
Figure 9
Figure 10
HBOI111L
O
I
Figure 11
To Next Page
Loading...
