K1000896E Operation and Maintenance Manual Operation 3-7
9. Release starter key when engine starts.
Key will return to "I" (ON) position.
10. After engine starts, check all indicator
lights and gauges to be certain that all
engine systems (oil pressure, oil
temperature, coolant temperature, etc.)
are in normal operating range. If any
engine system is not normal, turn starter
key to "O" (OFF) position.
11. Perform “Hydraulic System Warm-up –
Cold Weather” on page 3-10.
IMPORTANT
If engine does not start after
approximately 15 seconds of
cranking, release starter key. Wait 5
minutes for starter motor to cool
down. Repeat step 8.
HAOB360L
Figure 15
To Next Page
Loading...
