K1000896E Operation and Maintenance Manual Operation 3-9
ENGINE STOP
1. Move transmission lever to "NEUTRAL"
position.
2. Make sure transmission neutral lock is in
the "N" (NEUTRAL LOCK) position.
3. Set parking brake switch to the "I"
(APPLIED) position. This will ensure that
the parking brake is "APPLIED."
4. Set bucket on ground.
5. Put pilot cutoff switch to "O" (LOCK)
position. This will "LOCK" pilot control
valve lever (joystick).
6. Allow engine to idle for 1 - 2 minutes to
cool down.
Figure 17
Figure 18
HA0O2019
P
O
I
Figure 19
HBOI111L
O
I
Figure 20
To Next Page
Loading...
