System settings
System settings main menu: general settings, preview settings,
recording plan, recording backup, network configuration, storage
management, user management, alarm function, exception
handling, restore default, upgrade system The interface is shown
below:
General settings
【System Time】Set the current system date & time of the hard
disk recorder
【Date Format】Choose the format of the date display
【Time Zone】Choose your time zone
【Language】Support multiple languages
【Resolution】The default resolution is 1280x1024, 1024x768,
1280x720, 1440x900, 1920x1080
【Auto Logout(m)】Can set the menu standby time 0-60, 0 is not
set standby time;
【DST】Check the checkbox before daylight saving time to set
the start time and end time of daylight saving time.
【IPC Sync. Time】You can check to enable the IPC time
synchronization function, or you can uncheck to turn off the IPC
time synchronization function.
Operation steps: Use the mouse to click the option to be
modified, switch or manually input the value to be modified, and
click the 【Save】 button to take effect.
To Next Page
Loading...
