Hard disk settings
It can display the list of currently existing hard disks, including
model, capacity, usage, status, and format status. If you need to
format the hard disk, you can first select the corresponding hard
disk, and then click the format button. After a while, the selected
hard disk can be formatted, and the format status of the hard disk
will also be displayed as "formatted". The operation interface is as
shown in the figure below. After the operation is completed, click
Finish after the settings are completed to complete all the above
settings.
App Installation
Do not scan the QR Code displayed on the screen but the one
below.
Alternatively, you can directly download the Daewoo Home
Connect app.
To Next Page
Loading...
