User’s Manual
154
Warning light
Configure the settings for the warning light parameters.
Table 5-29 Warning light parameters
Channel
In the
list, select a channel that is connected to a warning light
camera.
Delay
Set a length of time for the Device to delay turning off alarm after the
alarm is cancelled. The value ranges from 5 seconds to 30 seconds, and
the default value is 5 seconds.
Mode Set the alarm mode of warning light to be
or
.
Flicker Frequency
When setting the alarm mode of warning light to be
, you can select
the flash frequency from
,
, and
.
Click Apply to complete the settings.
5.10.3.3 Configuring Siren
When the motion detection alarm is activated, the system links the camera to generate sound alarm.
To use this function, connect at least one camera that supports audio function.
Select Main Menu > ALARM > Alarm-out Port > Siren.
To Next Page
Loading...
