User’s Manual
206
SMD
In the Channel list, select a channel, and then enable it.
Configure the parameters.
SMD parameters
Channel In the
list, select a channel to set the motion detection.
Enable Enable or disable the motion detection function.
Sensitivity Set the sensitivity for smart motion detection.
Effective Target Select human or motor vehicle or both.
Schedule Define a period during which the motion detection is active.
Anti-Dither
Configure the time period from end of event detection to the stop of
alarm.
Alarm-out Port
Click
to display setting page.
General Alarm: Enable alarm activation through the alarm devices
connected to the selected output port.
External Alarm: Enable alarm activation through the connected
alarm box.
Wireless Siren: Enable alarm activation through devices connected
by USB gateway or camera gateway.
To Next Page
Loading...
Need help?
General
