Icon Description
/
If the VTH is connected to multiple VTOs/IPCs, tap and
to switch device.
If the VTH is connected to one VTO, the icon will not be
displayed.
Exit monitoring.
Tap to speak to the other end device.
Select an IPC, and when this VTO or fence station calls, you will
see the monitoring image from this IPC.
Display the serial number of the VTO or fence station in QR code.
Scan the QR code in the app to add it to the app, and then you
can monitor the VTO from your smart phone.
3.5.2 Monitoring IPC
3.5.2.1 Adding IPC
Background Information
●
IPCs added to the main VTO will be synchronized to the VTH. The synchronized IPCs cannot be
deleted.
●
Before adding an IPC, make sure that it is powered on, and connected to the same network as
the VTH.
Procedure
Step 1 Select Monitor > .
44
To Next Page
Loading...
Need help?
General