Dahua Technology VTH5422HB-W - 5.9 Viewing Alarm Information; 5.10 Device Sharing

Figure 5-5 DMSS QR code
Step 4 On the Add Device screen, enter the device name of the VTH, username and password of
the VTH, and then tap Save.
●
Device Name : customized.
●
Username : Enter user.
●
Password : Enter the network password of the VTH you congured in "3.6.6.4.1
Creating Network Password".
Figure 5-6 Add device
Step 5 Congure the time zone, and then tap Done.
You have completed the device adding steps.
5.4 Conguring Arm and Disarm
Make sure that the VTH and VTO are properly connected.
Procedure
Step 1 On the Home screen, tap , select the VTH you have just added, and then tap Device
Details to go to the function screen.
Step 2 Tap Disarm or Arm to disarm or arm the VTH.
107