Local Configurations 239
When the PPPoE function is enabled, the IP address on the TCP/IP interface cannot be
modified.
5.15.1.6 Configuring DDNS Settings
When the IP address of the Device changes frequently, the DDNS function can dynamically
refresh the correspondence between the domain on DNS and the IP address, ensuring you
access the Device by using the domain.
Preparing for Configuration
Please confirm if the Device supports the DDNS Type and log in the website provided by the
DDNS service provider to register the information such as domain from PC located in the WAN.
After you have registered and logged in the DDNS website successfully, you can view the
information of all the connected devices under this user name.
Configuring Steps
Select Main Menu > NETWORK > DDNS. Step 1
The DDNS interface is displayed. See Figure 5-203.
Figure 5-203
Configure the settings for the DDNS parameters. Step 2
Non Quick DDNS type. See Table 5-62.
To Next Page
Loading...
Need help?
General