Local Configurations 59
Figure 5-19
Configure the general settings parameters. See Table 5-3. Step 2
In the Device Name box, enter the Device name.
In the Device No. box, enter a number for the Device.
In the Language list, select a language for the Device system.
In the Video Standard list, select PAL or NTSC according to your actual
situation.
In the Instant Play box, enter the time length for playing back the
recoded video. The value ranges from 5 to 60.
On the live view control bar, click the instant playback button to play back
the recorded video within the configured time.
In the Auto Logout box, enter the standby time for the Device. The
Device automatically logs out when it is not working for the configured
time period. You need to login the Device again.
The value ranges from 0 to 60. 0 indicates there is not standby time for
the Device.
Click Monitor Channel(s) when logout. You can select the channels
that you want to continue monitoring when you logged out.
Syncs the Device time with IP camera.
IPC Time Sync
Period (hour)
In the IPC Time Sync Period box, enter the interval for time sync.
Enable the navigation bar. When you click on the live view screen, the
navigation bar is displayed.
Adjust the speed of double-click by moving the slider.
The bigger the value is, the faster the double-clicking speed must be.
Table 5-3
To Next Page
Loading...
Need help?
General