Dahua Digital VTH User Manual

23
VTO config
Add VTO or fence station.
 Add main VTO.
1) Enter the main VTO name, VTO IP address, username and password.
2) Turn on Enable Status.
User Name and Password must be consistent with the web interface login
username and password of the VTO.
 Add sub VTO or fence station.
1) Enter the sub VTO or fence Station name, IP address, username and password.
2) Turn on Enable Status.
Tap / to turn page and add more sub VTO or fence stations.
3.1.2.6 Searching Device
You can search for VTOs in the same network, and then add them or change their information.
Tap Search Device.
If you select Villa in Figure 3-15, it will be Add Device with the similar function.

Dahua Digital VTH Specifications

General

Brand	Dahua
Model	Digital VTH
Category	Intercom System
Language	English