27
4 Interface Operation
Main Interface
Main interface
Main interface description
Number of the room where the VTH is located.
View, delete and clear announcements or security alarm
information.
When the VTH does not have an SD card, and the video-
audio message uploading function is enabled on the
VTO, three tabs will be displayed, Guest Msg, Guest
Snap and Guest Video. You can view, delete and clear
the messages.
When the VTH has an SD card, the Video Pic tab will
be displayed. View, delete and clear the videos and
pictures.
Call other VTOs and VTHs.
View and manage the contacts and call records.
Monitor VTOs, fence stations, IPCs and NVRs.
Make emergency call to the Call Management Center.
Tap to enter system setting.
Tap for more than 6 seconds, input the password set
during initialization, and then enter project setting.
: Not connected to the network.
: Connected to the network through a cable.
To Next Page
Loading...
Need help?
General
