62
If delay alarm is set in the area, the device will beep continuously at the end of exit
delay time.
4.9.2 Disarm
Please ensure that it is in armed status. Otherwise, disarm will fail.
Tap disarm symbol at the lower right corner of the main interface.
Enter arm and disarm password; tap OK.
Default password of arm and disarm is 123456. Please refer to “4.6.6.3 Password
Setting” for details.
If you are forced to enter disarm password in case of emergencies, enter anti-
hijacking password, which is the reversed arm password. The system will disarm,
and at the same time, upload alarm info to management center/platform.
To Next Page
Loading...
Need help?
General
