Dahua Digital VTH

41
Add IPC
Configure the parameters.
Table 4-4 Parameter description
Parameter
Description
IPC
Select IPC or NVR.
IPC32 Name
Name of the IPC/NVR.
IP
IP address of the IPC/NVR.
User Name
Web interface login username and password of the IPC/NVR.
Password
Port
554 by default.
Stream Type
Main stream: High definition that needs large amount of bandwidth.
Applicable to local storage.
Extra stream: Relatively smooth image that needs small amount of
bandwidth. Applicable to network with insufficient bandwidth.
Protocol
It includes local protocol and Onvif protocol. Please select according to the
protocol of the connected device.
Encryption
Enable it if the IPC to be added is encrypted.
Channel
If IPC is connected, default setting is 1.
If NVR is connected, set channel number of IPC on NVR.
Tap OK.
4.4.2.2 Modify IPC
Select Monitor > IPC.
Tap of IPC.
Modify IPC parameters. Please refer to for details.
Tap OK.