62
Figure 8-7
8. In Figure 8-8, input corresponding host name in the filed. You can use this name to access device from an external
network. In the field to the right of the name, select the desired area. This is your domain name for access to the
device. Click “Create Host” button at the bottom of the page.
Figure 8-8
9. Now you can see an interface is shown as in Figure 8-9. Here you can view domain name and the computer's
current IP setup. If you already have a domain name equal to gurado trusted, you must define another name for the
host.
To Next Page
Loading...
