14
Parameter Function
Matrix
Please select the matrix X, and then input the corresponding monitor
output number, video input channel number, then you can click video
switch button to complete the operation.
2.7 Color and More Setup
Color and other setup interface are shown as in Figure 2-12.
Figure 2-12 Color
Please refer to the following sheet for detailed information.
Parameter Function
It is to adjust monitor video
brightness.
It is to adjust monitor video contrast
ness.
It is to adjust monitor video
saturation.
Video
setup
It is to adjust monitor video hue.
Note:
z All the operations here
apply to WEB end
only.
z Please go to chapter
3.2.2 System
configuration->Encode
setup->color setting to
adjust corresponding
system items.
Click more button, the interface is shown as in Figure 2-13.
Figure 2-13 Color and More
Please refer to the following sheet for detailed information.
To Next Page
Loading...
