23
Parameter Function
I Frame Here you can set the P frame amount between two I frames. The
value ranges from 1 to 150. Default value is 50.
Recommended value is frame rate *2.
Color Setting Here you can set video brightness, contrast ness, hue, saturation
and gain.
The value ranges from 0 to 100. .See Figure 3-9.
Please note gain value is read only.
Watermark
Here you can select watermark bit stream, watermark mode and
watermark character. Default character is DigitalCCTV. See
Figure 3-10.
Cover area
(privacy mask)
z
Here you can privacy mask the specified video in the monitor
video.
z
System max supports 4 privacy mask zones.
Time Title
z
You can enable this function so that system overlays time
information in video window.
z
OSD transparent value ranges from 0 to 255. 0 means
complete transparent.
z
You can use the mouse to drag the time tile position.
Channel Title
z
You can enable this function so that system overlays channel
information in video window.
z
OSD transparent value ranges from 0 to 255. 0 means
complete transparent.
z
You can use the mouse to drag the channel tile position.
Save You can click save button after you complete setup for one item,
or you can complete the whole setups and then click save button.
Refresh Click this button to get device latest configuration information.
3.2.3 Schedule
Here you can set different periods for various days. There are max six periods in one day. See Figure
3-11.
To Next Page
Loading...
