36
Parameter Function
Record
Channel
System auto activates current channel to record once alarm occurs
(working with alarm activation function). Please note current device
shall be in auto record mode (Chapter 3.2.3 Schedule).
Record
Latch
System can delay the record for specified time after alarm ended. Th
value ranges from 10s to 300s.
Email
Please draw a circle to enable email function. System can send out
email to alert you when alarm occurs and ends.
Tour
z
Display the selected video in local monitor window.
z
This function is not available in current device.
PTZ
activation
z
Here you can set PTZ movement when alarm occurs. Such as go to
preset x when there is an alarm.
z
The PTZ configuration events include preset, tour, and pattern.
Capture
You need to input capture channel number so that system can back
snapshot file to the SD card or send to the specified email box when
alarm occurs.
Copy It is a shortcut menu button. You can copy current channel setup to
one or more (all) channels.
Save You can click save button after you complete setup for one channel,
or you can complete the whole setups and then click save button.
Refresh Click this button to get device latest configuration information.
3.2.7 Detect
Analysis the video, system enable motion detection alarm when it detects the motion signal reached the
specified sensitivity.
The detection interface is shown as in Figure 3-25.
To Next Page
Loading...
