EasyManua.ls Logo

Dahua IPC-HDBW3300 - 2.4 Monitor Window Switch; 2.5 Preview Window Switch; 2.6 PTZ Control

Dahua IPC-HDBW3300
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
2.4 Monitor Window Switch
The monitor window switch interface is shown as in Figure 2-8.
Figure 2-8 Monitor Window Switch
Here you can select 1/4/6/8/9/13/16/20/25/36-window real-time preview.
Current series IPC support 1-window and full-screen display mode.
----It is video quality adjustment button. It has relationship with decode via software.
----The original image size in the webpage.
2.5 Preview Window Switch
The preview window switch interface is shown as in Figure 2-9.
IPC series products do not support this function.
Figure 2-9 Preview Window Switch
2.6 PTZ Control
Important
IPC series products do not support PTZ control function.
Before PTZ operation, please make sure you have properly set PTZ protocol. (Please refer to chapter
3.2.8 PTZ).
Here you can view direction keys, speed, zoom, focus, iris, preset, tour, pan, scan, pattern, aux close,
and PTZ setup button.
Please note: open menu/close menu/up/down/left/right/confirm/cancel buttons are for speed dome only.
z PTZ direction: PTZ supports eight directions: left/right/up/down/upper left/upper right/bottom
left/bottom right.
z Speed: The step 8 speed is faster than step 1.

Related product manuals