27
Parameter Function
Stop Bit
There are three options: 1/2.
Baud Bit You can select corresponding baud bit here.
Parity
There are five options: none/odd /even/mark/space.
3.2.5 Network
Network interface is shown as in Figure 3-15.
Figure 3-15 Network
Please refer to the following sheet for detailed information.
Parameter Function
Ethernet Please select the network card first.
Please select the port 02 if you are using wireless network
and then set the wireless IP address. Please note this
function is for –W series product only.
DHCP Dynamically get IP address. You can get the device IP from
the DHCP server if you enabled this function.
Device Name The device ID in the network.
TCP Port Default value is 37777.
HTTP Port Default value is 80.
To Next Page
Loading...
