45
3.3.6 Snapshot
Snapshot interface is shown as in Figure 3-34.
Figure 3-34 Snapshot
Please refer to the following sheet for detailed information.
Parameter Function
Channel It is the monitor channel.
Snapshot mode
There are two modes: Timing and activation.
Frame rate You can select from the dropdown list. The value ranges from
1f/s to 8f/s.
Resolution
You can select from the dropdown list.
The resolution may vary due to different series.
Quality
You can select from the dropdown list. Here is for you to set
video quality.
3.3.7 Abnormity
The abnormity interface is shown as below. See Figure 3-35.
To Next Page
Loading...
