54
5 Alarm
Click alarm function, you can see an interface is shown as in Figure 5-1.
Here you can set device alarm type and alarm sound setup.
Figure 5-1 Alarm
Please refer to the following sheet for detailed information.
Type Parameter Function
Video loss System alarms when video loss occurs.
Motion detection System alarms when motion detection alarm
occurs,
Disk full System alarms when disk is full.
Disk error System alarms when disk error occurs.
Camera
masking
System alarms when camera is viciously masking.
Encode alarm System alarms when encode module alarms.
Alarm
Type
External alarm Alarm input device sends out alarm.
Listening alarm System notifies web when alarm occurs (you select
from the above event type), and then web can
notify user.
Operation
Video When alarm occurs, system auto enables video
monitor. This function only applies to video
detection alarm (motion detection, video loss and
camera masking).
This function is invalid in external alarm mode.
To Next Page
Loading...
