10
Table 3-2 Description of quick toolbar
Icon Description
Displays whether the Signage is registered to MPS. This icon means not registered.
Go to main interface.
Adjust the backlight.
Select input source from Local and HDMI. Different devices support different input
sources.
Go to the quick play interface.
Lock the Signage.
Disconnect your USB drive from the Signage.
3.7 Releasing Project
You can release projects locally or through MPS.
Releasing projects locally is ideal for scenarios with a single required Signage.
If multiple Signages and media (pictures, videos) are involved, and network connection is
available, we recommend releasing projects through MPS. This will facilitate central management
of the Signage and media (pictures, videos).
You cannot release a project locally and through MPS at the same time. To release a project through
MPS, stop playing local projects first.
3.7.1 Network Release
Release projects through the network. Register the Signage to MPS when you use network release for
the first time.
3.7.1.1 Configuration Flow
Network release
Table 3-3 Configuration flow (network release)
Operation Description
Log in Log in and configure the Signage. For details, see "3.3 Login."
To Next Page
Loading...
Need help?
General
