2
2 Structure
Ports
Table 2-1 Description of ports
No. Name Description
1 Reset button
Contact customer service to use the button to restore the Signage to its
factory settings or reset the password.
2
Headphone
jack
Connects to 3.5 mm headphones to receive audio from the Signage.
3 TF card slot
Insert a TF card. The TF card is used to force update the Android OS or
provide media for projects. A force update is needed when the Android OS
restarts repeatedly or the Signage cannot be started.
You cannot use the TF card to store data on the Signage.
Contact the technical support if your Signage needs a force update.
4 HDMI port Connects to HDMI input source device.
5 ON/OFF Turn the screen on/off.
6 Network port Connects the Signage to the network through Ethernet cable.
7 USB 2.0 port Connects to devices such as mouse or USB drive.
8 DIP switch
Switch the function (OTG/USB) of the USB port on the right side (two ports
are designed). To use the port as a USB port, push the switch to the side of
the network port.
To Next Page
Loading...
Need help?
General
