30
After being updated, your device restarts.
System update
5.4 Configuring Auto Maintenance Time
By default, the Signage auto restarts at 1:00 a.m. each day. You can also set the time that the system
auto restarts, and click Save. The system auto restarts at the specified time.
On the main interface, select Settings > Maintenance and Upgrade > Auto Maintenance
Time Setting.
Drag your mouse up and down to select a time.
Click any position out of the Auto Maintenance Time Setting interface to finish
configuration.
Configure auto maintenance time
5.5 Turning Screen On/Off at Fixed Time
On the main interface, select Settings > Maintenance and Upgrade > Timing Screen Turn
On.
Click to enable turning screen on by week or customized time. means
enabled.
Custom settings come first when Custom and Week are enabled at the same time.
Click to configure the specific date and time. The screen will stay on for the defined
period.
Click Save.
To Next Page
Loading...