Dahua Lite NVR2104-4KS2 - Page 369

368
Parameter
Function
You can set interval value between the device and DDNS server
here.
After setting, click Save button.
Input full domain name on the browser and click Enter button. The setting is right if you can view device
WEB interface. Otherwise, please check the parameters.
5.10.2.8 Email
The email interface is shown as in Figure 5-41.
Figure 5-41
Please refer to the following sheet for detailed information.
Parameter
Function
Enable
Please check the box here to enable email function.
SMTP Server
Input server address and then enable this function.
Port
Default value is 25. You can modify it if necessary.
Anonymity
For the server supports the anonymity function. You can auto
login anonymously. You do not need to input the user name.
password and the sender information.
User Name
The user name of the sender email account.
Password
The password of sender email account.
Sender
Sender email address.
Authentication
(Encryption
mode)
You can select SSL or none.