User's Manual
137
You need to have storage authorities to implement the Manual record operation. Make sure the
HDD has been properly installed.
Procedure
Step 1 Right-click on the live view interface, and then select
Main Menu
>
STORAGE
>
Record
.
Figure 4-38 Record mode
Step 2 Configure parameters.
Table 4-10 Record mode parameters
Parameter Description
Channel
Displays all the analog channels and the connected digital channels. You
can select a single channel or select All.
Record status
●
Auto: Automatically record according to the record type and
recording time as configured in the recording schedule.
●
Manual: Keep general recording for 24 hours for the selected
channel.
●
Off: Do not record.
Snapshot status
Enable or disable the scheduled snapshot for the corresponding
channels.
Step 3 Click
Apply
to complete settings.
To Next Page
Loading...
Need help?
General
