User's Manual
330
4.11.3 External Wi-Fi
The device can be connected via wireless network with an external Wi-Fi module, and it can reduce
the difficulty of device connection without a network cable.
Prerequisites
Make sure that external Wi-Fi module is installed on the device.
Background Information
This function is supported on select models.
Procedure
Step 1 Select
Main Menu
>
NETWORK
>
Wi-Fi
.
Figure 4-216
Step 2 Select a site and click
Connect
.
Table 4-67
Parameter Description
Connect
Automatically
After it is enabled, the NVR will connect to the nearest site that was
previously successfully connected after boot-up.
Refresh Re-search the site.
To Next Page
Loading...
Need help?
General
