User's Manual
388
4.14.6.2 Illegal Login
Step 1 Select
Main Menu
>
SECURITY
>
Security Warning
>
Illegal Login
.
The
Illegal Login
interface is displayed. See Figure 4-275.
Figure 4-275 Illegal Login
Step 2 Select
Enable
and configure parameters. See Table 4-94.
Table 4-94 Illegal login parameters
Parameter Description
Alarm-out Port
The alarm device (such as lights, sirens, etc.) is connected to the alarm
output port. When an alarm occurs, the NVR device transmits the alarm
information to the alarm device.
Post Alarm
When the alarm ends, the alarm extended for a period of time. The time
range is from 0 seconds to 300 seconds.
Buzzer Select the check box to activate the buzzer when an alarm occurs.
Alarm Tone
Check the box and then select the corresponding audio file from the
dropdown list. System plays the audio file when the alarm occurs.
See "4.17.1 File Management" to add audio file first.
Log
Select the check box, the NVR device records the alarm information in the
log when an alarm occurs.
To Next Page
Loading...
Need help?
General
