User's Manual
309
4.9.2 Settings
Procedure
Step 1 Select
Main Menu
>
POS
>
POS Setting
.
The
POS Setting
interface is displayed. See Figure 4-195.
Figure 4-196 POS setting
Step 2 Configure the settings for the POS parameters. See Table 4-62.
Table 4-62 POS parameters
Parameter Description
POS Name
In the POS Name list, select the POS machine that you want to configures
settings for. Click to modify the POS name.
●
The POS name shall be unique.
●
The POS name supports 21 Chinese characters or 63 English characters.
Enable Enable the POS function.
Record Channel Click to select a channel to record.
Privacy Enter the privacy contents. Refer to "4.9.2.1 Privacy Setup".
Protocol
Select
POS
by default. Different machine corresponds to different protocol.
Connection Mode
In the
Connection Mode
list, select the connection protocol type. Click ,
the IP Address interface is displayed.
In the
Source IP
box, enter the IP address (the machine that is connected to
the Device) that sends messages.
To Next Page
Loading...
Need help?
General
