User's Manual
350
Table 4-77
Parameter Description
Enable Enable the alarm center function.
Protocol Type
In the
Protocol Type
list, select protocol type. The default is
Alarm
Center
.
Host IP
The IP address and communication port of the PC installed with alarm
client.
Port
Auto Report Plan
In the
Auto Report Plan
list, select time cycle and specific time for
uploading alarm.
Step 3 Click
Apply
to complete the settings.
4.11.15 Register
Background Information
You can register the Device into the specified proxy server which acts as the transit to make it easier
for the client software to access the Device.
Procedure
Step 1 Select
Main Menu
>
NETWORK
>
Register
.
The
Register
interface is displayed. See Figure 4-234.
Figure 4-234
Step 2 Configure the settings for the register parameters. See Table 4-78.
To Next Page
Loading...
Need help?
General
